TORMAX T2 opac hermetic
Hermetic and Air-Tight Door Systems for Special Areas
TORMAX pays the utmost attention to each technological and functional aspect of its door systems. With TORMAX T2 opac hermetic, we have set new quality standards for hermetically and airtight closing doors. The innovative sliding door system meets the specific quality requirements of highly sensitive work areas in hospitals, clinics, laboratories and industrial facilities.
TORMAX T2 opac hermetic sliding doors are certified and can be equipped with single or combined application modules such as radiation, fire and smoke protection, sound insulation or as damp and wet room doors.
Highest Quality Standards for Critical Areas
Hermetic or airtight design
Depending on the ventilation system, you opt for the hermetically sealed or the airtight version. The hermetically closing door system seals all around by gently lowering the door leaf just before closing and pressing it against the wall connection profile. With the airtight version, three sides are sealed. The door leaf is pressed against the wall but does not lower itself. Instead, it leaves a gap open at the bottom edge for controlled and consistent overpressure.
Safe and quiet in operation
Integral sensors ensure an uncompromising protection and error-free detection of persons. They are built into the door system in a discreet and hygienic manner. Vibration-absorbing components enable extremely quiet operation, thus increasing the comfort even more.
Individual fittings and designs
The sophisticated technology is installed invisibly in a slim, elegant structure. The design and materials of the door leaves can be customised in many different ways. A wide range of accessories is available.
Reliable and inexpensive to maintain
You benefit from TORMAX’s decades of experience: long-lasting, tried and tested components ensure low maintenance costs.
More safety, more value
The TORMAX Hermetic automatic sliding door system meets the highest safety standards and is certified to EN 16005 / DIN 18650. Thanks to the newly developed, unique sealing of the system it meets the requirements for air-tightness and comfort combined with a high degree of safety.
Elegant design developed for the most stringent hygiene requirements
Product Features at a Glance
- Full hermetic sealing with all-round door leaf seal
- Lowering / pressing mechanism integrated in the drive and door leaf
- Dynamic door movement even for heavy door
- Door opening widths 800 – 2000 mm, passage height max. 2500 mm
- Numerous options for equipments and customisation
Operation
- Full opening, partial opening with time and step switch, can be adjusted in combination
- User interface with 5 operating modes, status display and error display
- Functions Push & Go, Pull & Close
- Emergency open, emergency close
- Easy-to-clean design with sloping upper cladding section
- Continuous floor area, no guide elements in the doorway
Design
- Very slim, elegant drive housing, cross-section only 280 x 135 mm (H x D)
- Combi-sensor for opening and safety is discreetly incorporated in the cladding.
The door is also secured when the cladding is open. - Door leaf enclosure made of anodised aluminium
- Door leaf surface can be finished in stainless steel or with HPL coating, in a wide variety of colours, with windows in any desired shapes and fittings
Options
- Impulse generators: push-button, contactless switch, card reader, key switch
- Air-tight door system without lowering mechanism, sealed on three sides
- Integration within higher-level systems
- Radiation protection: 1, 2 or 3 mm lead inlay, other dimensions on request, shielding effect verified by independent body
- Sound insulation: Wood core with extra sound absorbing door leaf inlay (Rw = 37 dB)
- Damp and wet room application: Inorganic door leaf cores for damp or wet rooms, resistant to liquids and cleaning agents up to climate class III
- Fire and smoke protection: Complies with EI130 / EI230 (fire protection) and Sa / S200 (smoke protection)
- Bacteria repellent surfaces
- Monitored battery unit
- Lock unit
Approvals
- CE, TÜV, ift, PfB
Nedlastinger
- Amendments to instructions of use | Air lock
- Certificate | SQS ISO 9001:2015 LANDERT Group AG
- Certificate | PfB Sealing Behaviour - TORMAX T2 opac hermetic (TORMAX 2353.HERM and 2453.HERM)
- Certificate | TÜV - TORMAX T2 opac hermetic sliding door system (TORMAX 2353.HERM and 2453.HERM)
- Certificate | PfB airborne sound insulation - TORMAX T2 opac hermetic sliding door system
- Instructions for use | TORMAX 2352.HERM and 2453.HERM sliding door systems
- Risk Evaluation | Risk evaluation
- Specification Text | TORMAX 2353.HERM and 2453.HERM sliding door systems